Additional Information

Site Information

"ON-LINE" brand blades Challenger series

MEET THE NEW "ONLINE CHALLENGER" SERIES SCROLL SAW BLADES.

These new 5" plain end scroll saw blades are very similar to the TLB (Tough Little Blades) without reverse teeth and the Olson regular Scroll Fret blades, also identified as "skip tooth" blades. The big difference is that the TLB and Scroll/Fret blades typically have approximately 3" to 3.25" of "tooth surface area" or cutting area and our Challenger series have 4.5" of tooth surface area for cutting thicker stock.

NOTE: Cutting stock thicker than 1-3/4" is a very different and challenging process requiring experience and almost perfect conditions, ie. high blade tension, less dense wood, good quality kiln dried wood, less distinct grain, very slow feet rate, etc. - but the end result can be very gratifying with the Challenger blades. GIVE IT A TRY!

SKU  WIDTH THICK TEETH PER INCH TOOTH SURFACE AREA PRICE PER DOZEN BUY A DOZEN PRICE PER GROSS BUY A GROSS
 CH-2/0  0.022  0.009 28
4.5" 3.80 atc.jpg 38.00  atc.jpg
 CH-0  0.025  0.011 28
4.5" 3.80 atc.jpg  38.00  atc.jpg
 CH-2  0.033  0.013 25 4.5" 3.80 atc.jpg  38.00  atc.jpg
 CH-4  0.037  0.014 18 4.5" 3.80 atc.jpg  38.00  atc.jpg
 CH-6  0.043  0.017 17
4.5" 3.80 atc.jpg  38.00  atc.jpg
 CH-8  0.053  0.018 14  4.5" 3.80  atc.jpg  38.00  atc.jpg
 CH-10  0.063 0.020
13 4.5" 3.80   atc.jpg 38.00  atc.jpg
 CH-12  0.070 0.021
13 4.5" 3.80  atc.jpg 38.00  atc.jpg
CH-14
 0.074 0.022
13 4.5" 3.80  atc.jpg  38.00  atc.jpg
    There are no products in this category.